Author Topic: K3-Twin: Fldigi tx frequency 600hz higher than VFO freq  (Read 1141 times)

vk3ga

  • Newbie
  • *
  • Posts: 11
    • View Profile
    • Email
Hi,

I have a K3-Twin setup with PC line-in and line-out connected to the Mini for digital modes.

When I choose CW or RTTY or PSK in Fldigi, the tx frequency is 600Hz higher than what the VFO is showing.

If I use the M1-M4 memories, no problem, the frequencies match.

Any ideas?

Thanks and 73, Graham VK3GA

dj0qn

  • Hero Member
  • *****
  • Posts: 2150
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: K3-Twin: Fldigi tx frequency 600hz higher than VFO freq
« Reply #1 on: 2016-09-21, 15:56:09 »
Graham,

That looks like an Elecraft question, so I suggest you ask on their reflector at http://mailman.qth.net/mailman/listinfo/elecraft
instead.

From Googling a bit, it looks like you may have the VFO not set to mode DATA-A, but the memories are correct. However, you
should really ask the K3 and Fldigi users on that reflector.

73,
Mitch DJ0QN / K7DX