Author Topic: UDP command status error(0) impact  (Read 1167 times)

N8MW

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
UDP command status error(0) impact
« on: 2016-10-31, 02:15:25 »
I am getting the UDP command status error.  Possibly because it's not enabled in WiFi connection.  I am using the RRC for audio and PTT only.  Will the error affect operation for these functions?

dj0qn

  • Hero Member
  • *****
  • Posts: 1803
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: UDP command status error(0) impact
« Reply #1 on: 2016-10-31, 04:09:29 »
Did you forward all three UDP ports?

73,
Mitch DJ0QN / K7DX

N8MW

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: UDP command status error(0) impact
« Reply #2 on: 2016-10-31, 18:06:36 »
No, I don't need UDP control I'm only interesed in whether or not it will affect audio or PTT.

dj0qn

  • Hero Member
  • *****
  • Posts: 1803
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: UDP command status error(0) impact
« Reply #3 on: 2016-10-31, 18:10:11 »
You absolutely MUST forward all three ports! Otherwise, nothing will work, including audio!

73,
Mitch DJ0QN / K7DX

N8MW

  • Newbie
  • *
  • Posts: 10
    • View Profile
    • Email
Re: UDP command status error(0) impact
« Reply #4 on: 2016-11-01, 03:55:08 »
All those ports are forwarded, but I still get the UDP command status error(0).  What can cause this error?

dj0qn

  • Hero Member
  • *****
  • Posts: 1803
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: UDP command status error(0) impact
« Reply #5 on: 2016-11-01, 03:58:48 »
You would get that error if the a port is not forwarded or blocked. Also make sure that SIP ALG
is turned off.

If you send me a short mail to dj0qn (at) darc.de, I can send you my networking checklist that
may be able to help you.

73,
Mitch DJ0QN / K7DX