Author Topic: Audio quality can not be changed  (Read 4316 times)

ur4qrh

  • Newbie
  • *
  • Posts: 3
    • View Profile
Audio quality can not be changed
« on: 2017-08-01, 10:46:45 »
Hello!

I use remoterig rrc1258 mkII (v2.91) and rrc-micro 1274B (v 1.10.1.0)
but i can not change audio quality, i change in rrc1258 but realy in status windows i always see "Current audio quality 0 - alaw 8 kHz"
also i see about 90-100 kbits traffic in the internet channel regardless of the audio mode selected.
Anybody can check this ?

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Audio quality can not be changed
« Reply #1 on: 2017-08-01, 11:35:04 »
That is I believe correct behavior. I am pretty sure that Mike said that the RRC Micro Client as well
as the Nano Client both automatically set the audio quality to CODEC 0 for the duration of the
session.

73,
Mitch DJ0QN / K7DX

ur4qrh

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Audio quality can not be changed
« Reply #2 on: 2017-08-01, 11:37:22 »
But for digital mode is not the best choice?

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Audio quality can not be changed
« Reply #3 on: 2017-08-01, 11:41:29 »
Maybe not, but since you can use this setup without any additional interface by taking audio directly
off of the stream, it usually works very well.

73,
Mitch DJ0QN / K7DX

ur4qrh

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Audio quality can not be changed
« Reply #4 on: 2017-08-01, 11:59:53 »
ok, Thank You Mitch for clarifications.