RRC 1258 Support in English > General discussion forum
Remote Rig Repair
sm2o:
Data abort DO NOT indicate any problem with the RCC. All RRC shows that sometimes. If you can browse them the IP interface works. Look at other things that may have changed.
73 de mike
IZ0JOJ:
thanks for your reply.
I still do not understand.
Nothing has changed. The only maybe has changed is here (remote side) where I changed the access point. I just updated the wifi password. that's it.
What I do not understand is why we have the same problem (myself and this other OM) and you suggested him to bring back to you the remote rig and indeed to me you suggest to simply check the connection.
Should maybe try to check the SIP number?
However, when I go to the ttls your wesbite to check if he solved the dynamic ip , yes it's working well.
So, I do not undersstnad where the problem is.
If you could help I will be grateful to you
best 73
sm2o:
In general If you have changed something the you should look at the changed equipment for the trouble. Check that SIP ALG is off for example. You talk about access point, if you have chaged it, try to connect by cable instead first.
But if you can browse the RRC the RRC is OK, and it's a matter of settings somewhere.
/mike
Navigation
[0] Message Index
[*] Previous page
Go to full version