Author Topic: ICOM7100 1258MKII - SIP Error - SIP Status Unknown(1)  (Read 4523 times)

DO8FJ

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Hello,

switching over to ddns from LAN I do not get any connection to my ICOM7100. It seems to be that everything is ok and my I-Net provider (same one on both sides - even router model) does support true IP adresses I cannot get connection to my Transceiver.

Status
Name   Value
P5.4   OFF
Radio   OFF
Connection status   Disconnected
SIP status   Unknown(1)
Last SIP error   SIP Error
RTP/UDP audio status   Disconnected
UDP cmd status   Disconnected
SIP command timeout   3
Rx Jitter buffer size   4
Rx Jitter delay   3
Dual Rx   0
SIP Out port   13000
SIP In port   13000
Audio Out port   0
Audio In port   0
Command Out port   0
Command In port   13002
External SIP In port   13000
External Audio In port   13001
External Cmd In port   13002
Other party   (IP Address)
Input 0   High
Input 1   High
Input 2   High
Output 0   Low
Output 1   Low
Output 2   Low
DNS status   OK, xxxxxxx.ddns.remoterig.com = (IP Adress)
Active profile   Default
PTT status   OFF
Common network settings   No
System messages   No

The 1258MKII (Firmware 2.91.) was working fine on proper LAN connection.

HELP needed :D

Best regards,

Jens

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: ICOM7100 1258MKII - SIP Error - SIP Status Unknown(1)
« Reply #1 on: 2018-01-15, 22:25:18 »
Jens,

Did you forward the correct ports in your router and change the SIP contact to the external IP address
or DynamicDNS address?

73,
Mitch DJ0QN / K7DX

DO8FJ

  • Newbie
  • *
  • Posts: 2
    • View Profile
    • Email
Re: ICOM7100 1258MKII - SIP Error - SIP Status Unknown(1)
« Reply #2 on: 2018-01-16, 22:11:00 »
Hello Mitch,

do you have a description for that?

Best regards,

Jens

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: ICOM7100 1258MKII - SIP Error - SIP Status Unknown(1)
« Reply #3 on: 2018-01-16, 22:38:51 »
Hi Jens,

I guess that is a "nein". This is covered in the manual on pages 11 & 12, but I can send you
my networking checklist that walks you through the procedure if you want.

Du kannst mir eine kurze Mail an dj0qn (at) darc.de senden und ich kann die Checkliste an dich weiterleiten.

73,
Mitch DJ0QN / K7DX