Author Topic: SOFTWARE PTT - ICOM IC-7100  (Read 789 times)

N5NHJ (I8NHJ)

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • Email
SOFTWARE PTT - ICOM IC-7100
« on: 2017-10-22, 19:05:24 »
I'm trying to set up WSJT-X with my IC-7100 and I wasn't able to key the transmitter via any COM RTS/DTR line.
After an exhaustive test session that included using different software too (N1MM, MTTY, DX4WIN) here they are my findings:

1) The radio can be set up in transmission using the CAT commands, but no audio is transmitted if the PTT is not pressed (it seems remoterig DO NOT pass audio without pressing the radio PTT)

2) The radio can be keyed using COMExt only if both DTR and RTS are HIGH;

3) Using COM1 or COM2 works for sending CW (DTR), doesn't work for PTT (RTS);

Any suggestion?

 
----------------------
73 de Max, N5NHJ (I8NHJ)
one  of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E, PJ7DX, 6Y1V, C6ANA, VP5/I8NHJ, ZF2NH and...

N5NHJ (I8NHJ)

  • Newbie
  • *
  • Posts: 14
    • View Profile
    • Email
Re: SOFTWARE PTT - ICOM IC-7100
« Reply #1 on: 2017-11-02, 15:19:48 »
No words from the support?
Thanks.
Max
----------------------
73 de Max, N5NHJ (I8NHJ)
one  of EL2PP, 1A0KM, JT1Y, E30GA, T77V, TT8MM, T32R, K5K, XR0X, S05X, 4O3T, BS7H, K4M, PJ7E, PJ7DX, 6Y1V, C6ANA, VP5/I8NHJ, ZF2NH and...

EA1IIO

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: SOFTWARE PTT - ICOM IC-7100
« Reply #2 on: 2018-05-15, 22:44:50 »
Hello,

I have a Kenwood TS-480. I spent 3 days until I get it working.

My screenshots are attached, if you need more info, please ask :)

« Last Edit: 2018-05-15, 22:46:29 by EA1IIO »