Author Topic: Vox with Icom IC-7100  (Read 3433 times)

W7HLR

  • Newbie
  • *
  • Posts: 3
    • View Profile
Vox with Icom IC-7100
« on: 2018-01-14, 04:38:58 »
Vox does not work when the IC-7100 is in the remote control configuration, but is fine when directly connected to the base rig.  Is Vox supported via remote?  Is so, how do I configure?

dj0qn

  • Hero Member
  • *****
  • Posts: 2223
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Vox with Icom IC-7100
« Reply #1 on: 2018-01-14, 05:14:10 »
To allow VOX to work with any rig under RemoteRig, you must change under advanced settings
the "RTP tx mode" to "continuous" on both RRC's.

73,
Mitch DJ0QN / K7DX

W7HLR

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Vox with Icom IC-7100
« Reply #2 on: 2018-01-16, 02:23:44 »
Thank you, Mitch!  Works fine now.