Author Topic: Data Abort  (Read 8339 times)

dk3pz

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • QRZ.COM
    • Email
Data Abort
« on: 2016-01-02, 14:26:24 »
Data Abort
0x0004a8a4  called by 0x0004a8a0
It happened from time to time and the connection (IC706) stopped; what does it mean ?

73, Hans

Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1829
    • View Profile
    • Email
Re: Data Abort
« Reply #1 on: 2016-01-03, 06:57:17 »
We need the firmware version in order to see if a cause can be found.
Always include type of hard/software and version when asking for support.

dk3pz

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • QRZ.COM
    • Email
Re: Data Abort
« Reply #2 on: 2016-01-03, 08:37:11 »
Hi Jan,
tnx fr reply; working with
RRC1258-CRC-v2.87_2015-08-26 ; but it happened alsio from time to time with Version 2.86 before

Got also message Data Abort at 0x0004ae30  called 0x0004ae2c

after hours of stable working......73, Hans


Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1829
    • View Profile
    • Email
Re: Data Abort
« Reply #3 on: 2016-01-03, 10:21:37 »
OK, will have a look once back at work after the holidays :)
Always include type of hard/software and version when asking for support.

Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1829
    • View Profile
    • Email
Re: Data Abort
« Reply #4 on: 2016-01-04, 15:07:27 »
Data Abort
0x0004a8a4  called by 0x0004a8a0
It happened from time to time and the connection (IC706) stopped; what does it mean ?

73, Hans
Something went nuts inside the IP stack. Not possible to see exactly what happened. We are planning to update the IP stack and hopefully that will help eliminating problems like this.
Always include type of hard/software and version when asking for support.

Jan (Microbit)

  • Software Developer
  • Administrator
  • Hero Member
  • *****
  • Posts: 1829
    • View Profile
    • Email
Re: Data Abort
« Reply #5 on: 2016-01-04, 15:09:19 »
Hi Jan,
tnx fr reply; working with
RRC1258-CRC-v2.87_2015-08-26 ; but it happened alsio from time to time with Version 2.86 before

Got also message Data Abort at 0x0004ae30  called 0x0004ae2c

after hours of stable working......73, Hans
That's also something going wrong inside the IP stack. Also not possible to find out more about what caused it etc.
Always include type of hard/software and version when asking for support.

ea4gli

  • Newbie
  • *
  • Posts: 1
    • View Profile
    • Email
Re: Data Abort
« Reply #6 on: 2016-01-04, 16:54:22 »
I am also getting the same error.

Saved error message:

Data Abort at 0x0004a8a4, called by 0x0004a8a0


Name   Value
Company   Microbit
Product   1258
PID   4
Version   7
HW   8
Software   2.86
Bootloader   1.10
Compiler   4.6.2
Build   May 28 2015 11:12:06
ROM/RAM   476084/42016
ETH-RAM   2944 (max 3kB)
USB-RAM   15348 (max 16kB)
Battery-RAM   4
ResetSrc   0 [3]
Last WD Reset   10

dk3pz

  • Newbie
  • *
  • Posts: 23
    • View Profile
    • QRZ.COM
    • Email
Re: Data Abort
« Reply #7 on: 2016-01-04, 17:07:26 »
Hi Jan...thanks ... will wait for the update....TU , 73, Hans

SO3Z

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Re: Data Abort
« Reply #8 on: 2016-05-31, 15:37:18 »
Hi any updates ? when we find update to repair this bug ?

And after few days of continues operation. It happens again.

Data Abort at 0x0004ae30, called by 0x0004ae2c

My Remote RIG RRC-1258 MkII  + Icom IC7100
Software 2.87
Bootloader 1.10
Build Aug 26 2015 11:23:58


Normally when I lost some packets, panel turn off and after few seconds turn on again. Or if it is longer unavability of connection I can manualy turn on the radio.

It can't be problem with TCP/IP I think beacuse I reboot both routers, both RRC-1258 and I can't power on radio again.
Only one solution is to manualy power off the radio and RRC completly via psu.


SO3Z

  • Newbie
  • *
  • Posts: 9
    • View Profile
    • Email
Re: Data Abort
« Reply #9 on: 2016-07-12, 21:00:57 »
Any chance for solution or firmware update  ?


isurkov

  • Newbie
  • *
  • Posts: 7
    • View Profile
    • Email
Re: Data Abort
« Reply #10 on: 2018-01-11, 15:02:50 »
Hi, All!

I have similar error messages on my Radio RRC unit: Data Abort at 0x00047314 , called by 0x000472db

And I am also suffering from constant but random reboots of Radio Unit. http://www.remoterig.com/forum/index.php?topic=5664.0

Please advise, how it could be resolved? Is there any solution?
« Last Edit: 2018-01-11, 16:51:14 by isurkov »

IZ0JOJ

  • Jr. Member
  • **
  • Posts: 41
    • View Profile
Re: Data Abort
« Reply #11 on: 2018-01-20, 15:56:03 »
Same here.
Worked flawlessy for 1 year.
Since one month: Data Abort at 0x000541a8, called by 0x0004259c

Firmware 2.90 - Microbit RRC 1258 MKII -
Kenwood TS 480.

Thanks
best 73