Author Topic: TS590S & ARCP590  (Read 74 times)

k.haber

  • Newbie
  • *
  • Posts: 5
    • View Profile
    • Email
TS590S & ARCP590
« on: 2018-02-04, 20:16:42 »
Hi,

Have somebody controlled an TS590s via ARCP590 and RRC1258?

In the moment (for testing) I am running 2 RRC1258 in my Local Area Network.
Audio streaming is doing very well, but the "CAT" connection to ARCP590 is not stable!

First I am using COM2 afterwards COM1 with different baud rates (9600, 19200, 38400).

Always the same: After some minutes well working, the ARCP590 "CAT" connection goes down,
while audio streaming is continuing very well. After pressing the ARCP590 "CONNECT" button
the "CAT" goes up again for a few minutes.

Would be nice if anybody have an idea or can help! vy 73 de Klaus, OE2KHM

dj0qn

  • Hero Member
  • *****
  • Posts: 1678
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: TS590S & ARCP590
« Reply #1 on: 2018-02-04, 22:55:23 »
Klaus,

I have sometimes noticed that the driver is somewhat unstable under certain conditions.
I am not sure if anything can be done to solve it. What I do is a work-around: I use a good
Prolific USB to serial converter and go to the RRC's COM2 as a standard serial connection.
This method is rock solid.

73,
Mitch DJ0QN / K7DX