Author Topic: Lost SSB Audio  (Read 562 times)

Howard

  • Newbie
  • *
  • Posts: 2
    • View Profile
Lost SSB Audio
« on: 2018-04-10, 02:53:17 »
I have been using Remote Rig to connect remotely for over 2 yrs. Then all of a sudden I can only transmit a tune-up tone. In SSB mode I only transmit "White noise" ...no audio. None of the settings have changed and interconnect cables test out to be ok. Anyone have experience with this? Thanks.

dj0qn

  • Hero Member
  • *****
  • Posts: 2040
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Lost SSB Audio
« Reply #1 on: 2018-04-10, 04:21:22 »
Audio is in hardware only. Your problem must be in:

- the microphone cable
- or the cable that goes from the radio RRC AUX/MIC jack to the rig microphone
- or one of the red straps in one of the RRC's came loose
- or there is a setting in the rig that is messed-up

73,
Mitch DJ0QN / K7DX

Howard

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Lost SSB Audio
« Reply #2 on: 2018-04-10, 17:58:29 »
Thank you, Mitch. Very helpful.