RRC 1258 Support in English > Hardware, Cabling, Installations

K3/P3 Remote and Local

(1/2) > >>

WC2L:
Hi Folks,
I am new to the K3/P3 and K3/0 configuration. I have the K3 with the K3IOB and the P# wotking just fine. I find that if I am local, I need to have the Y cable connected to the PC connection on the P3. When I want to operate the K3 remotely, I need to switch cables. Is there a way I can have the best of both worlds?? 

I hope that I explained this correctly!
TNX Will WC2L

dj0qn:
Hi Will,

You can also use the RRC's COM1 in parallel with COM2 for CAT. Just change it to mode-7 and away you go.

73,
Mitch DJ0QN / K7DX

WC2L:
Awesome!!! Works great locally. I will have to try to test the remote next!! I know it will work  :)

TNX Will WC2L

dj0qn:
I forgot to mention to make sure that both RRC's are set to mode-7.

73,
Mitch DJ0QN / K7DX

WC2L:
I have not gotten that far yet!  I will check it out...

Will WC2L

Navigation

[0] Message Index

[#] Next page