RRC 1258 Support in English > General discussion forum
Connection Faulty - Stalled
IZ0JOJ:
Hello everyone
I finally managed to get the two interfaces connected.
But... I've this error
Can somebody help?
dj0qn:
Do you have SIP ALG turned on in the router? Otherwise, try turning off each router's firewall to see
if that solves it.
Something is blocking the port(s).
73,
Mitch DJ0QN / K7DX
IZ0JOJ:
Hi Mitch,
thanks again for your precious support.
Well, there are news: I had an attempt connecting my interface (connected to the panel of TS 480) direct to the router via LAN.
It worked and I enjoyed it for about half an hour. I disconnected the cable and tried again with WIFI. Again, just yellow led, and same errors as reported above. Tried again with the LAN, worked.
Now, after 2 hours, ...LAN didn't work.
....
dj0qn:
You didn't say if the LAN and WiFi were in the same network, or a different one from the radio.
73,
Mitch DJ0QN / K7DX
IZ0JOJ:
Hi Mitch,
thanks for your reply.
Yes, same router.
Now I make it working using my iphone 3G (hotspot)... but after been using it for 20 minutes - i shut up for a whiel and now that I am trying it again it's now working anymore. Indeed the kenwood ts 480 is beeping out (like the telephone - tu tu tu tu t u)
:-(
Navigation
[0] Message Index
[#] Next page
Go to full version