RRC 1258 Support in English > General discussion forum
Considering purchase of Yaesu Twin
(1/1)
AC9TA:
Hello all. I am considering purchase of the Yaesu twin system for remote operation. Currently I am using Ham Radio Deluxe and Teamviewer to control my FTDX5000MP remotely from my home. My shack is at my place of business. I would like to improve performance of the setup. I am considering purchasing the Yaesu Twin solution and a second radio - probably a used FT950. My question is what can I expect from this setup? It is a large investment to purchase the remoterig and a radio so I would like to be sure it will work as expected. I have high speed internet at both locations. Will the CAT connection to HRD have to be disconnected to use remoterig? If I turn on the local radio (FT950) will that initiate a "power on" on the remote FTDX5000MP? Any insight would be appreciated.
Thanks
dj0qn:
In the past I used a pair of FT-2000's to use the "Yaesu Twin" mode when it first came out.
Perhaps someone else can give you their take on the combination you propose, but here are a
couple of inputs from my side:
Positives:
- Quality of connection is like RemoteRig offers, a far better experience than using software only
- Any RRC pair will work and it is no longer necessary to buy the special Yaesu Twin version
Negatives:
- Using the pair you proposed will mean that you not be able to use all the features of the FTdx-5000;
you are restricted to the controls of the FT-950
- There were some bugs with the Yaesu Twin that were never resolved, as far as I know. Since I
retired my setup, I can't test it any more. Search the Forum for details. My old posting is at:
http://www.remoterig.com/forum/index.php?topic=858.msg3457#msg3457
To answer your questions:
CAT: The setup indeed uses COM2 for both sides, but all you need to do is to run COM1 in mode-6 or
mode-7 and pull CAT off of COM1 instead. The baud rate does not even need to be the same as COM2.
Power on: The answer is YES. This is a positive feature of Yaesu's CAT implementation.
I hope this helps.
73,
Mitch DJ0QN / K7DX
Navigation
[0] Message Index
Go to full version