Author Topic: Help with RRC1258 and Icom 7100  (Read 198 times)

sv_clintrace999

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Help with RRC1258 and Icom 7100
« on: 2019-01-11, 04:08:38 »
Hi everyone

I just set up the ic-7100 on Lan and works, but when I hooked up to the internet it doesn't. can anyone check my connection and see if my network is able to get my remoterig work or is it the ISP problem?  I believe you will just look into my public and WAN ip and you can tell if it works thru the internet.  i'm willing to be remoted thru teamviewer, or anydesk or whatever remote you can use.  Please shoot me an email asap, I badly need your help.

sv_clintrace999@yahoo.com


thanks,

Clint
W0/DV9HRV

South Dakota 57551

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Help with RRC1258 and Icom 7100
« Reply #1 on: 2019-01-11, 06:55:02 »
Clint,

I can help you out.

I first suggest that you contact me directly at dj0qn (at) darc.de and I will send you my
networking checklist first. This should help you find your problem, since mostly it is caused
by one or two items that were not done correctly.

If that doesn't help, then we can make a schedule when I can take a look using Teamviewer.

73,
Mitch DJ0QN / K7DX

sv_clintrace999

  • Newbie
  • *
  • Posts: 3
    • View Profile
    • Email
Re: Help with RRC1258 and Icom 7100
« Reply #2 on: 2019-01-11, 17:49:15 »
Hi Mitch,

Just sent you an email please check thanks

dj0qn

  • Hero Member
  • *****
  • Posts: 2006
    • View Profile
    • DJ0QN / K7DX
    • Email
Re: Help with RRC1258 and Icom 7100
« Reply #3 on: 2019-01-12, 20:03:56 »
Just to follow-up.....problem was solved. Issue with router's port forwarding that was solved
by moving to DMZ instead.

73,
Mitch DJ0QN / K7DX