RRC 1258 Support in English > General discussion forum
Can't access webpage after a few days
VK4KY:
Hi,
My K3 pair have been running well for a few months now with only a couple of minor issues. After a restart I can access the webserver in the remote unit to change settings etc. however after a few days I can no longer access it. I can however still connect and operate the remote transceiver.
Any ideas?
Andy VK4KY
dj0qn:
Andy,
Did you change the port to something other than 80?
73,
Mitch DJ0QN / K7DX
Gesendet von meinem SM-G955U mit Tapatalk
VK4KY:
Hi Mitch,
The port is still set to 80. If I restart the remote unit it works again for a few more days.
Andy
dj0qn:
Hi Andy,
That is most likely your problem. You should change it to a different port number and forward that
port instead. Address your RRC with a colon following the URL, e.g. rkdgt793.ddns.remoterig.com:XXXX
where XXXX is the new port number. I am pretty sure that your problem will go away then.
73,
Mitch DJ0QN / K7DX
VK4KY:
Hi Mitch,
Initially I did not have a username or password set for access to the web interface. I have now set username and password for the web interface and the system has been running for weeks without any problems.
Andy
Navigation
[0] Message Index
[#] Next page
Go to full version