Author Topic: Connecting to a different type rig from my RRC-Control  (Read 2873 times)

KB8CR

  • Full Member
  • ***
  • Posts: 104
  • IC-7100 and IC-706 on RRC's
    • View Profile
    • Email
I have my RRC-Control box set up for Icom CI-V. I am using an Icom hand mic on it.

If I set up a RRC-Radio box for a Yaesu (General) rig, and cable it to that radio, can I use the RRC-Control box as it is currently configured (except for changing the mode parameter to Yaesu), or do I need to change the jumpers in the RRC-Control box and use a Yaesu mic?

Thanks

Charlie KB8CR

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3004
    • View Profile
    • sm2oan
    • Email
Re: Connecting to a different type rig from my RRC-Control
« Reply #1 on: 2020-04-20, 08:12:46 »
Yes you can use the ICOM Mic in the control end, without restrapping. Maybe the mic gain has to be adjusted, but it should work

73 de mike

KB8CR

  • Full Member
  • ***
  • Posts: 104
  • IC-7100 and IC-706 on RRC's
    • View Profile
    • Email
Re: Connecting to a different type rig from my RRC-Control
« Reply #2 on: 2020-04-20, 16:58:21 »
Thank you . I thought[ so but wasn't sure.