Author Topic: PC client Software and CW  (Read 7441 times)

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
PC client Software and CW
« on: 2011-05-01, 23:29:32 »
Hey

I have tested the new version 1.2.0 PC client software this weekend.
All working fine exept for using the CW Keyboard.
Maybe there is someting i have forgoten, i cant PTT or go in to TX mode when i do CW.
I programed the F1 to, "DE LA7THA", and when i pres the F1 key all looks god but the radio dont do any TX, no power or cw out. What about enable VOX in HRD ? Hmmmm any sugestion


73 Rune LA7THA

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: PC client Software and CW
« Reply #1 on: 2011-05-02, 14:38:17 »
More info

Using PC client software 1.2.0
Firmware in radio RRC is 2.37
Rig used is Kenwood TS480
Software for radio Ctrl is HRD (Ham Radio Deluxe)

73 Rune LA7THA

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3003
    • View Profile
    • sm2oan
    • Email
Re: PC client Software and CW
« Reply #2 on: 2011-05-02, 14:54:47 »
Hi

Yes you must activate VOX or SEMI BREAK IN and Sidetone in the Radio.

I use TS-480 my self and it works

73 de mike


LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: PC client Software and CW
« Reply #3 on: 2011-05-02, 19:34:55 »
Hey Mike

I have done what you mentioned but still NIL cw here using the PC Micro client.
I Tested CW using my "ordenary" RRC and all worked fine. TS480 is set to bug Key, Vox, and even today i enabled TX audio sidetone all is working fine.
Just wonder, when i using PC Client if HRD disable Vox or something ? Not sure here what the problem is.

I have 3 screen shot added here of the TS480 Extended Menu using HRD you can see if there is anything that
is different than on your TS480 setup.

73 Rune LA7THA

sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3003
    • View Profile
    • sm2oan
    • Email
Re: PC client Software and CW
« Reply #4 on: 2011-05-02, 20:32:28 »
Hi

"Bug key" should be off, and the key line should be connected to the straight key input, sidetone should be activated and VOX should be activated

73 de mike

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: PC client Software and CW
« Reply #5 on: 2011-05-03, 07:21:43 »
Hey Mike

Bug key" should be off, (IS OFF) and the key line should be connected to the straight key input, (That is how it always have been connected) sidetone should be activated, ( IS set to 5 and i can listen to the side tone when i using my ordenary setup) and VOX should be activated (Is activated)

When you say straight Key input that is how it has been for yers and working fine using my "ordenary" RRC and TS480 display. As i am typing this measage i tested again using the settings abow and all is working fine in my "ordenary" setup.

I can NOT here the sidetone when i using the PC Micro Client setup when i try to send CW (Vox Not activated ???) Using HRD version 5 build 2816 Beta. Is there a VOX "On/OFF" buton in your HRD Version ? anyway i cant find anything here that can turn VOX on or OFF but when i turn on "ordenary" sytem using RRC and TS480 Dispaly it says it is turned ON.

73 Rune LA7THA



sm2o

  • Administrator
  • Hero Member
  • *****
  • Posts: 3003
    • View Profile
    • sm2oan
    • Email
Re: PC client Software and CW
« Reply #6 on: 2011-05-03, 07:56:17 »
email me login info to your radio-RRC so I can test from here

73 de mike

LA7THA

  • Jr. Member
  • **
  • Posts: 75
    • View Profile
Re: PC client Software and CW
« Reply #7 on: 2011-05-03, 12:16:16 »
Hey

Mike fond my problem, i have forgoten to set I/O in radio RRC.
Thanks Mike for the help, working fine now. For users that may do the same see my scren shot.

73 Rune LA7THA
« Last Edit: 2011-06-11, 05:42:15 by LA7THA »