Author Topic: Micophone Input  (Read 1777 times)

fnord

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Micophone Input
« on: 2011-04-20, 14:41:58 »
I got a USB Condenser Mic, could i select the Condenser Mic from the List?
2nd.
If i got Virtual Audio Cable installed does it accept the Virtual Audio cable Input as input?
Example:
(MMSSTV-> (Virtual Audio Cable Output) --- >  (RRC Micro Software) --> (Virtual Audio Cable In))
2nd. PTT Keying

Is it possible to use VOX in this Programm so a noise gate dsp part in the program could also activate PTT?

roland

  • Guest
Re: Micophone Input
« Reply #1 on: 2011-04-20, 15:09:23 »
You can you any mic thats registered as a valid mic in Windows.
Same thing for speaker. Use any valid Windows speaker device thats listed.

NOTE. The Microbit 1274A audio device must be present as a Windows device
even if you use another mic and speaker.


fnord

  • Newbie
  • *
  • Posts: 21
    • View Profile
    • Email
Re: Micophone Input
« Reply #2 on: 2011-04-20, 22:28:59 »
i hope this stuff runs in a Virtual Environment under OSX (the USB Dongle may be a problem...)
And if that works, it should be possible to store the Microphone "wiring" setup in a preset, and select the preset in the Windows Tray or Keyboard shortcut...
e.g Switching from digital Mode chain to Microphone mode.
« Last Edit: 2011-04-20, 22:33:26 by fnord »