RRC-Micro PC Client in English > General discussion
RCC control output
(1/1)
WA2TTP Steve:
When using the PC client/RCC setup is there any way to get a control output from the RCC via the PC client? It would be useful to control power to the remote radio.
Steve
sm2o:
Hi
There is no way to control the outputs from the pc-client. But you can set an IO pin to be activated automatically when you connect or set it in on/off mode. In on/off mode you can browse to the Radio-RRC and activate and deactivate the IO pin direct from the webpage. Maybe you have to upgrade to a later firmware to get this functions. 73 de mike
WA2TTP Steve:
Thanks Mike. I'm still in the planning mode so I haven't purchased a unit yet. So when I do it should come with the latest firmware I would assume.
Navigation
[0] Message Index
Go to full version