RRC-Micro PC Client in English > General discussion
PC client Software and CW
LA7THA:
Hey
I have tested the new version 1.2.0 PC client software this weekend.
All working fine exept for using the CW Keyboard.
Maybe there is someting i have forgoten, i cant PTT or go in to TX mode when i do CW.
I programed the F1 to, "DE LA7THA", and when i pres the F1 key all looks god but the radio dont do any TX, no power or cw out. What about enable VOX in HRD ? Hmmmm any sugestion
73 Rune LA7THA
LA7THA:
More info
Using PC client software 1.2.0
Firmware in radio RRC is 2.37
Rig used is Kenwood TS480
Software for radio Ctrl is HRD (Ham Radio Deluxe)
73 Rune LA7THA
sm2o:
Hi
Yes you must activate VOX or SEMI BREAK IN and Sidetone in the Radio.
I use TS-480 my self and it works
73 de mike
LA7THA:
Hey Mike
I have done what you mentioned but still NIL cw here using the PC Micro client.
I Tested CW using my "ordenary" RRC and all worked fine. TS480 is set to bug Key, Vox, and even today i enabled TX audio sidetone all is working fine.
Just wonder, when i using PC Client if HRD disable Vox or something ? Not sure here what the problem is.
I have 3 screen shot added here of the TS480 Extended Menu using HRD you can see if there is anything that
is different than on your TS480 setup.
73 Rune LA7THA
sm2o:
Hi
"Bug key" should be off, and the key line should be connected to the straight key input, sidetone should be activated and VOX should be activated
73 de mike
Navigation
[0] Message Index
[#] Next page
Go to full version