Author Topic: CW Key Plug  (Read 1635 times)

dj0qn

  • Hero Member
  • *****
  • Posts: 1883
    • View Profile
    • DJ0QN / K7DX
    • Email
CW Key Plug
« on: 2011-06-22, 19:12:43 »
I have a strange problem with the CW paddle connection:

I have three remote installations using RemoteRig and TS-480's that I currently manage.

In one of them, RemoteRig works just fine with a CW paddle cable plugged fully in the RRC's and TS-480's jacks.

In two of them, it does not. If you plug the cable about two-thirds of the way into the jack on the RRC,
then it works just fine. If you move it out a bit or push it all the way in, it doesn't work.

All three installations are identical, both in hardware and in RRC settings.

Anyone have a clue why this would be the case? It is not a "killer" problem, but it would be nice to solve this mystery.

73,
Mitch DJ0QN / K7DX