Author Topic: DIGIMODES - RRC1258MkII - TS480SAT  (Read 8717 times)

LA7THA

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
Re: DIGIMODES - RRC1258MkII - TS480SAT
« Reply #15 on: 2012-09-24, 22:06:25 »
Hey

Did you find any sulution on this one, i have done the same, i also only get a carier when i transmitt. Out0 on remote RRC is set to RTTY > to pin 8 (From ts480 usermanaul, RTK RTTY (FSK) keying input. Ground this terminal to alternate Mark and Space.) Out1 is Keyer (and it work) Out2 is set to PTT > to pin 3 (from ts480 manaual, Ground this terminal to transmit. ANI (DATA connector) terminal turns OFF)

any help please

73 Rune la7tha



LA7THA

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
Re: DIGIMODES - RRC1258MkII - TS480SAT
« Reply #17 on: 2012-09-27, 20:23:27 »
Hi

I will try this, thanks for help and info.

73 Rune LA7THA

SV1DPI

  • Newbie
  • *
  • Posts: 14
    • View Profile
Re: DIGIMODES - RRC1258MkII - TS480SAT
« Reply #18 on: 2012-10-12, 06:50:10 »
At Radio site: Wire jumper goes from I/O PIN 6 (Radio RRC OUT1 is set to Baudot/45) to the TS480SAT Remote connector PIN 7 - RTK.
mine goes to pin8 in 480 side
see more details here
http://users.otenet.gr/~sv1dpi/en/articles/remoterig.html