Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: W3ETC on 2012-02-02, 16:54:51
-
Hello all....I am considering purchasing the Remote Rig as I currently own the Kenwood TS 480 SAT. I have not been able to find what the exact cables that I need to connect the TS 480 to the remote rigs. It seems straight forward but a little guidance would be appreciated.
Regards W3ETC
-
All cables that you need are included in the RemoteRig and TS-480 boxes. Please refer to the
newest manual, page 156-160, or look at http://www.remoterig.com/wp/?page_id=452 under
the "cables" tab.
I understand that the U.S. version of the TS-480 may not include the mobile mounting bracket
and a second RJ-11 modular cable. If you need this as well, just go to a Radio Shack or similar
and buy a telephone cable that has all wires connected (I think it is called a 3-line cable or something
like that). You can see if all the wires are all connected by looking at the end of the cable.
73,
Mitch DJ0QN / K7DX