Remote Rig

RRC 1258 Support in English => General discussion forum => Topic started by: w7jag on 2011-04-26, 05:07:42

Title: setting up the k3 with remote rig help please
Post by: w7jag on 2011-04-26, 05:07:42

I should be receiving my K3 friday, and need some help to hit the ground running.    I will be using the remote rig rrc1256mkII pair
in the instructions as they pertain to the manual it states that the RS-232 from the Radio goes to the COM2 plug  on the radio remote rig, the stereo audio out goes to the speaker, and the microphone to the AUX mic.  The control rig the RS-232 plugs to Com2 and then out to computer USB to be controlled with HRD etc.

When looking at the user manual with regards to Elecraft the only settings it has us do are in the radio settings menu option, and not any mention of serial settings menu option.
My concern is if we are using RS-232 cables which are serial cables why are there no mention of that menu, or program parameters for that.
any assistance as to how I can get this up and running quickly would be helpful

I have the dyndns and networking side figure out I just need assistance with the physical parameters so I can get the two box talking to each other while using HRD

Mark
w7jag

Title: Re: setting up the k3 with remote rig help please
Post by: kb0r on 2013-08-04, 18:49:34

Did you ever get HRD working with your K3?

73,
Larry
KB0R