Remote Rig

RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: Mike/K3MMB on 2011-08-14, 17:54:49

Title: USING NANOSTATION M2 Display issue
Post by: Mike/K3MMB on 2011-08-14, 17:54:49

I have set up a private network using a linksys router and two NANOSTATION M2 WIFI units.

The 706 will turn on and receive and transmit, but the display stops working after awhile. Has anyone experimented with this?

73
mike

Title: Re: USING NANOSTATION M2 Display issue
Post by: dj4mz on 2011-08-16, 09:32:49

Hi Mike,

I also have had some problems with the 706-display not coming up at all, or stopping to work after some time. I my case it was simply a bad connection of the RJ45 connector in RJ45-jack of the control RRC so check the cabling first!

vy 73
Simon, DJ4MZ

Title: Re: USING NANOSTATION M2 Display issue
Post by: Mike/K3MMB on 2011-08-16, 16:55:43

Roger That,

I will test both ends tonight. Thanks for the suggestion.

73
mike