Topics

1

Configuration of Routers, Firewalls, etc / RTP/UDP audio statusError(0) by access from internet

« on: 2019-07-13, 22:12:09 »

Hi,
I tried to implement a remote station in Germany. Access in LAN from Remote to control works without issues. If I connect from outside my LAN I am getting the RTP/UDP audio status   Error(0) and no audio. I have tried with PC Demo, and Android App.
It looks like the ISP (Deutsche Telekom) is dropping the UDP traffic. I am not the Network expert, but the wireshark analysis is showing no connection on 13001. Connect and Control is working as expected. The router is a Fritzbox and the remoterig ip is set as exposed host.
Ans hints from out there?

73s, Olli, DH2WQ

2

General discussion forum / Virtual Comport works just in Mode 1

« on: 2013-12-07, 12:23:31 »

Hi,

I just set up mine old FT100 with the Remoterig Set i bought for my K3. I will use the FT100 until K3/0 Mini is available and the remote head operation is quite impressive.

I discovered a odd behavior. If i connect a external USB Serial Converter to Com2 on control side and a self made interface for the FT100 on Com2 on radio side Communication the CAT control works well in char-timeout mode as well as Char-by-char mode.

If i use the virtual vomport, just the char-by-char mode works. I'm testing in the moment in my home LAN, so there isn't a issue on this and later on the radio side will be connected to university LAN so i guess this will also work. It is just a question if i'm missing something here. Does someone has an idea?

Thanks and a nice weekend,
Olli, DH2WQ