Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: ke7hfp on 2022-07-13, 19:22:08
-
The status page is not coming up:
http://ddns.remoterig.com/status/
-
>:( I confirm that from this afternoon it is not possible to connect with the remote station: DDNS servers are not working. How come?
-
I also can not connect to my remote station. Other connections such as security camera and computer to computer are working so I suspect remoterig DDNS is not working.
-
I created a DNS entry at https://www.dynu.com/ and was able to connect to my radio.
-
Hi Guys, the same here in DL....The ddns service doesn´t work.
@ke7hfp how do you include the dynu url in the rrc? I mean you can only use ddns.remoterig.com and members.dyndns.org!
-
I only updated the rrc control with the new dyn URL. This was a partial solution just to get going again. Admittedly not much better than just entering the ip. The rrc radio still has the remoterig ddns. Hopefully the remoterig ddns will come back online.
-
I went ahead and entered the IP address with the port. Temp until the DNS server gets going again.
Since its been out a while, my best guess- and that's all this is- is that they are on holiday, and
the DNS server won't be back on until Monday at the earliest.
Dennis W1UE
-
It is down for me also. I first noted loss of connectivity yesterday on two remote sites. The Radio unit's PWR indicator is solid so I assume it is talking to DDNS, but both remotes have the slow flashing indicator and as commented, the status link is nonfunctional. Been chasing my tail for a couple hours before finally deciding it had to be the DDNS failure
-
Hello, could someone from the company tell me where to go? Has this DDNS service been discontinued?
-
Now is already working
-
The name services antenna rotator remotely still does not work. IP addressing works.
-
Everything works now, great!