Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: oh3bjl on 2009-09-11, 15:21:50
-
Hi.
Is it possible to control via internet other ICOM radios than only IC-706's
by using the package configured for IC-706. For instance, can I use this package
to control, for instance, IC-756proIII, so that I use PC and HRD at the operator end?
How about other manufacturer's radios?
73, Kari OH3BJL
-
Yes, you can work all (almost) CAT capable radios that use a normal serial interface.
If you can use it with HRD locally you can use it with RRC remotely.
Mikael can comment on settings and such.
Read more here: http://www.styrefors.se/sm2oan/remote/icom_gen.htm
Anders
-
Hi,
how about IC-703, is it compatible enough with ´706 to be used "as is" with RR, without HRD/PC?
73 de Ari OH3KAV
(planning a solar-powered, over-the-3G-remote-controlled QRP-station)
-
Hi
Yes as far as I know IC-703 is compatible with IC-706. I haven't had the possibility to make practical tests but I almost 100% shure it will work.
73 de mike
-
Yes as far as I know IC-703 is compatible with IC-706.
Hi,
today we tried my IC-703 in Kari OH3BJL's RemoteRig setup
and it seems to work without any problems with the ´706
settings. So we can confirm RR's IC-703 compatibility!
73 de Ari OH3KAV / OH7KA
-
Hi
Yes I borrowed one last week also and tested. After that I changed all info to include both IC-703 and IC-706.
Thank you for the information anyway.
73 de mike