Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: LA7THA on 2010-11-24, 19:16:30
-
HI Gents
I got the web-switch to read/sniff data from the rig and working @ 9600 baud.
This is ok when you using HRD/TRX-Manager etc. Can the web-switch handle 57600 baud ?.
When i try 57600 it don't work, or maybe it is the opto circuit i used that don't handle this, not sure.
My friend LA9KKA want to make something so we can use the web-switch when HRD/TRX-Manager
is not in use. He want to get this to work when the Remote-head is used.
He basically wants make a circuit that read data from the rig when RCC-Radio are in program mode 5.
From what i know this is not possible today, want to use the web switch for change antennas automatically
when change band etc.
73 Rune LA7THA
-
The Webswitch asks the radio about the frequency no problem.
Why using 57600 ? I think it will switch antenna fast enough with 9600 baud
73 de nike
-
Hi
I don't need 57600 baud to switch my antenna faster, but from what i remember the TS480 when using
Front/Remote head you need to set the radio RCC to Program mode 5 and baud rate to 57600 ?.
Is there something that i have lost here ?
73 Rune LA7THA
-
yes
but that's the speed between the control head and the radio (fixed). The speed of the CAT port in the Radio which the WEB-Switch should be connected to is set separately in the Radio.
73 de mike