Remote Rig
RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: sv5byr on 2011-08-31, 15:38:29
-
Hello all,
Im using a Fritz Router that uses the 5060 port for VOIP telephony. How to change the SIP port to another to avoid the blocking on port forwarding ???
TNX in Adavance Mike
SV5BYR
-
Mike,
Just go to the advanced settings and change the port under "SIP port". Make sure you change both RRC's.
See page 50 in the manual.
73,
Mitch DJ0QN / K7DX
-
Hello,
There is no Avdanced Settings no where Mitch on my Fritz..
???
-
Mike,
Not in the FritzBox, in the RRC's!
You then forward the new port in the FritzBox.
73,
Mitch DJ0QN / K7DX
-
Mitch my remote station is 85 km away and I have make already the port forwarding on Router at remote site for 5060 port. Now the only easy thing is the SIP port change of Fritz Box Fon
-
Hi Mike,
Then I afraid that you must get in your car and take a drive if you can't configure your
radio-RRC and router remotely :'(
Port 5060 is the standard SIP port that is fixed in routers such as the FritzBox and can
not be changed. That is why my checklist I send to people who ask for it includes a change
to the RRC SIP port.
73,
Mitch DJ0QN / K7Dx
-
Mike,
sorry you did not mentioned the problem when I was in SV5
a few weeks ago
could have been solved in little time
Guy ON4AOI