Remote Rig
RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: K8SG on 2015-08-12, 17:50:04
-
I just received my Remoterig equipment and am in the process of setting it up. I have Comcast internet using a third party router. The IP address on this router is 192.168.0.19 (IPv4 address). The Microbit User Manual says the IP address must be between 192.168.0.2 and 192.168.0.254. What do I need to do. I have never done much work with networks; any help would be appreciated. Speed Gray, K8SG
-
Gray,
Drop me a short mail at dj0qn (at ) darc.de and I will send you my networking checklist that walks you through the process of installation.
73,
Mitch DJ0QN / K7DX
-
Hello Mitch:
Sent you an e-mail at the address you indicated. Haven't heard back from you. Just checking to make sure you received it.
My email is speed_gray@yahoo.com
speed underscore gray at yahoo.com
Thanks for your help.
73, Speed
-
Hi Speed,
Nothing received, maybe it was deleted as spam. I will send it now, since I have your e-mail address.
73,
Mitch DJ0QN / K7DX