Messages

2461

General discussion forum / Re: Kenwood TM-D710E front panel problems

« on: 2011-12-25, 20:17:48 »

Is the manual so bad ? I have never heard anybody soldering the straps before, they should just be put into the sockets without doing anything else. The socket do not survive soldering, so that can be the problem. Im afraid I cant help any more if that's the case. The sockets has to be replaced.

/mike

2462

General discussion forum / Re: Kenwood TM-D710E front panel problems

« on: 2011-12-25, 20:06:04 »

Now you really scares me talking about solder iron, What ever you do do not solder inside the boxes.
The 2x RJ45 extender is just for testing purposes. What happens when you get in trouble. Is the connection going down or is it just the display which stops showing anything ? What are the red and yellow LEDS showing ? is there any error indications on the status pages ?

/mike

2463

General discussion forum / Re: Kenwood TM-D710E front panel problems

« on: 2011-12-25, 19:35:37 »

Hi

Now I remember I sent you my cables that I have used for years. And made new ones for my self so you can be sure they works. Are you sure you have set the red jumpers correct. The serial connection  from the TTL connector is also connected to the jumper socket so if a jumper is miss placed it can disturb the communication.

73 de mike

2464

General discussion forum / Re: Kenwood TM-D710E front panel problems

« on: 2011-12-25, 19:23:49 »

The only thing which can be wrong is the cables to the front panel. Nothing else is involved. You can reduce the backlighter to reduce power consumption. Im not sure how much power the panel needs. I use the TM-D710 my self and it works perfect, it's up for months. I never switch it off I have the Control RRC connected to 20A PS together with other things so I have never reflected over the power consumption. But I have never heard anyone else having problem with the TM-D710.

I hope you solve it

73 de mike

2465

General discussion forum / Re: Need help with RC1216H.

« on: 2011-12-22, 09:46:49 »

WE are talking about the Remotecontrol  RC-1216H not the webswitch.

http://www.remoterig.com/wp/?page_id=1010

73 de mike

2466

General discussion forum / Re: 3G via ICS (notebook and HSPA stick)

« on: 2011-12-21, 21:06:39 »

I have used the PC as Gateway to 3G many time myself for demonstrations on hamfests and exhibitions. I just set the RRC to DHCP. And then bridge the two connections together in win7. Mark up both and right click and select brigde.

73 de mike

2467

General discussion / Re: Com1 & Com2 sometime

« on: 2011-12-21, 21:02:36 »

If you use com2 for the rotator the cable should be straight not crossed as in Rolands description. I don't think there is any problem with the RRC-micro software.

73 de mike

2468

General discussion forum / Re: Need help with RC1216H.

« on: 2011-12-21, 09:48:24 »

Ok

we will fix the support for 80,40,30m also

questions
1, OK
2, Yes it shoud never switch off the SDA100, it's only the relay which can do it.
3, See SDA100 manual, you must switch on the SDA100 and let it be on for minimum 3 minutes, then it will understand that after disconnect and reconnect power it will switch on automatically. You can test that that it work without the RC-1216H also.

2469

General discussion forum / Re: Need help with RC1216H.

« on: 2011-12-21, 08:25:41 »

Leo

What you mean is that you can not manually select 7 and 10 MHz. I think we have to add those bands, we forgot about it beacuase I only have the 4 el with 14-50 MHz. What is the default frequencys when you select 7 and 10 MHz ? 7,050 I guess and maybe 10,100 or ?

73 de mike

2470

News / Merry Christmas and Happy New Year + Christmas Discount

« on: 2011-12-20, 10:03:19 »

Merry Christmas and Happy New Year!
from Mike and the team behind Remoterig

As a christmas present from Remoterig you get 10% discount on orders before end of 2011.
Just place the order and enter the discount code "JUL2011" when checkout.

2471

News / New firmware (v2.0) for Webswitch 1216H with lot of new features

« on: 2011-12-20, 09:51:18 »

New firmware (v2.0) for Webswitch 1216H with lot of new featurs concerning antenna switching, support for Yaesu rotator interface GS-232B etc. More info http://www.remoterig.com/wp1216/?page_id=162

2472

News / New firmware for RRC-1258all. v2.50

« on: 2011-12-20, 09:50:30 »

News in version 2.50:

- New function: Automatic switching in Radio-RRC for users who want to altern between K3 twin/Yaesu Twin or RRC/PC -control. No change of settings needed. The Radio RRC switch between mode 14/10 and 4 automatically.
– New function: PTT off mute delay time ( andvanced settings). Makes it possible to mute chirps coming from Tx-monitor audio when PTT is released.
– Fix: One situation where USB could hang up is fixed.
– Fix: Pwr on/off command  for Yaesu FT-450/950/2000/5000/9000 now always sent if mode=4 and Yaesu pwr on/off = Yes.
– Users manual version A18 updated with the functions above.

2473

General discussion forum / Re: IC706MK2g and Computer control via HRD

« on: 2011-12-19, 19:27:41 »

Hi

The data signal from radio to panel is missing somewhere. It can be one the red straps which is broken or the ic706 cable.Even if it they work connected directly it can be a problem with the data-gnd in the cable. If you email me login data I can try to connect from here to determine if it's in the control or radio end you have the problem.

73 de mike

2474

Hårdvara, Kablage, Installationer / Re: DTMF mikrofon IC-2820

« on: 2011-12-18, 11:35:23 »

Hej

Jo som det står på hemsidan så går det bara att ansluta Mickortet till 1258MkIIs dvs de senare som har Dual RX. Det skall alltså stå RRC-1258MkIIs på etiketten under för att det skall funka.

73 de micke

2475

General discussion forum / Re: DIGIMODES - RRC1258MkII - TS480SAT

« on: 2011-12-16, 14:33:25 »

– New function: PTT off mute delay time ( andvanced settings). Makes it possible to mute chirps coming from Tx-monitor audio when PTT is released.

new function in v2.50

73 de mike