Remote Rig

RRC 1258 Support in English => Configuration of Routers, Firewalls, etc => Topic started by: K8SG on 2015-08-12, 17:50:04

Title: IP address help
Post by: K8SG on 2015-08-12, 17:50:04

I just received my Remoterig equipment and am in the process of setting it up. I have Comcast internet using a third party router. The IP address on this router is 192.168.0.19 (IPv4 address). The Microbit User Manual says the IP address must be between 192.168.0.2 and 192.168.0.254. What do I need to do. I have never done much work with networks; any help would be appreciated.  Speed Gray, K8SG

Title: Re: IP address help
Post by: dj0qn on 2015-08-12, 19:12:16

Gray,

Drop me a short mail at dj0qn (at )  darc.de and I will send you my networking checklist that walks you through the process of installation.

73,
Mitch DJ0QN / K7DX

Title: Re: IP address help
Post by: K8SG on 2015-08-14, 12:27:39

Hello Mitch:

Sent you an e-mail at the address you indicated. Haven't heard back from you. Just checking to make sure you received it.

My email is speed_gray@yahoo.com

speed underscore gray at yahoo.com

Thanks for your help.

73, Speed

Title: Re: IP address help
Post by: dj0qn on 2015-08-14, 12:46:37

Hi Speed,

Nothing received, maybe it was deleted as spam. I will send it now, since I have your e-mail address.

73,
Mitch DJ0QN / K7DX