Remote Rig
RRC-Nano => General => Topic started by: oz2nyb on 2015-04-29, 13:44:07
-
The connect button is not responding. OZ2NYB system is Kenwood TS-480, SIP port 5060, UPD audio 11000, UDP cmd 12000. My carrier is Telmore. The smartphone is connected to the internet via my local wifi. When using TS-480 front and RRC-1258 instead of the smartphone, no problems.
Any ideas?
Nick OZ3TQ, OZ2NYB EDR Nyborg clubstation
-
I am not sure if this is the solution, but most carriers block port 5060. One should in general never use port 5060 for RemoteRig.
73,
Mitch DJ0QN / K7DX
-
Hi
Be sure that you installed both the server and the brand specific App ?
When connection works, remember that you need the CAT cable from COM2 to the Radio CAT port also
73 de mike
-
Hi
I have installed both Nano S and Nano K.
I will check the CAT cable between Radio and Radio RRC.
73 de Nick
-
Hi Mitch
I will try changing the SIP port.
Thank you for your replies.
73 de Nick