Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: EA1HET on 2018-02-10, 00:23:28
-
Hi there,
I started a thread on the general forum and after researching a bit I think I may be close to the root of the issue. The question here is: Does the RRC control unit (the one I have close to my FT-857D frontal) provides VCC (+5V) on the RJ45 connector (labeled AUX/MIC) ?
Thanks in advance.
Best regards,
Jonathan
EA1HET
-
No only 8 or 9V for the frontpanel power
73 de mike
-
Hi Mike,
Thanks for the clarification. Any configuration option, internal mod or jumper change that can allow me to get that +5VCC in the RJ45 connector?
Thanks in advance.
Best regards,
Jonathan
EA1HET
-
I submitted a feature request for the same OR if remoterig will manufacture a small in line adapter box to provide required voltage on proper pins.
We could home brew such but would be nice if it is already manufactured.