Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: pd0swl on 2015-08-08, 11:49:12
-
Hi,
Doing the 2.86 update on 3 of my RRCs via the webbrowser I noticed that the browser feedback ("loading fw, now flashing" etc) was absent.
I did several attempts to update the units, they seemed not to respond, but they did go offline.
It was unclear what they were doing.
Update eventually was succesfull, checking the info page of the webbrowser.
73!
Paul
PD0SWL
-
Hello
I have also a problem
I canot update
vy 73 de Carsten
-
Hi
try to upgrade via the webinterface intstead
73 de mike
-
Ehm..
That's what I was doing :)
73
Paul
PD0SWL
-
The picture you have sent is from the Microbit Setup Manager, not from the web interface
73 de mike
-
Hello
I have also a problem
I canot update
vy 73 de Carsten
From which version are you trying to upgrade? Also, like Mike wrote, try using the web interface and see if that works better.
-
Hi,
Doing the 2.86 update on 3 of my RRCs via the webbrowser I noticed that the browser feedback ("loading fw, now flashing" etc) was absent.
I did several attempts to update the units, they seemed not to respond, but they did go offline.
It was unclear what they were doing.
Update eventually was succesfull, checking the info page of the webbrowser.
73!
Paul
PD0SWL
Seems like a timing issue which caused the "Flashing..." text not to appear in the browser then.
-
That was my guess; the browser goes offline before giving UI feedback.
It happened on 3 of my RRCs though.
Never seen it before in years of updating...
Just FIY.
73!
Paul
PD0SWL