Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: IZ0JOJ on 2018-07-04, 21:57:00

Title: Help with the remoterig and Kenwood TS 480
Post by: IZ0JOJ on 2018-07-04, 21:57:00

Hello everyone,

I have setup my RRC with the DDNS http://t05lcmmo.ddns.remoterig.com
even if I can manage to remotely see the interface at this address
http://87.26.106.238:8091

So, I also added the IP of the interface (given by the router) 192.168.2.188 into the DMZ setting of the router.

Nothing...it's not working at all.

Can anyone give me some insights?

thanks

Title: Re: Help with the remoterig and Kenwood TS 480
Post by: dj0qn on 2018-07-04, 22:28:34

Remove the http:// from the SIP contact, only use the DynamicDNS address.

73,
Mitch DJ0QN / K7DX

Title: Re: Help with the remoterig and Kenwood TS 480
Post by: IZ0JOJ on 2018-07-04, 22:33:23

Hi Mitch,
thanks for your reply.

I didn't type http://

just the t05lcmmo.ddns.remoterig.com

Sorry to be confusing.

These are the settings: if you connect to t05lcmmo.ddns.remoterig.com:8091
you can see...

thanks

Title: Re: Help with the remoterig and Kenwood TS 480
Post by: dj0qn on 2018-07-04, 22:34:14

Leave off the :8091, that is not part of it.

73,
Mitch DJ0QN / K7DX

Title: Re: Help with the remoterig and Kenwood TS 480
Post by: IZ0JOJ on 2018-07-07, 18:02:22

hi,
as per instructions I have just typed  t05lcmmo.ddns.remoterig.com in the space.
still not working.

I have open the UDP for 13001 13002 and 13005
nothing

Therefore I tried to activate the DMZ with the IP of the interface given by the router...
nothing.

Any hints?
thansk

Title: Re: Help with the remoterig and Kenwood TS 480
Post by: dj0qn on 2018-07-07, 21:40:15

Never do a port forward and DMZ for the same ports at the same time. It usually causes problems.

I tried to look at your RRC using the address above, but it no longer works. I suspect that is because
of the above.

73,
Mitch DJ0QN / K7DX