Remote Rig
RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: oe3cfc on 2012-12-21, 18:39:47
-
>:(Hello
Please help me!
Config: Kenwood TS480 RRc 1258MKII,2.62 Software, serial 4936, VDSL
Since April the Remote goes very very well, no Problems no Failure.
This week i change the Station from the gartenhouse ( 10 degress under 0 to a warm place !!! (7 Grad Celsisius)
And now the question???
The same Internet connection, the same cables all the same but now i can not turn on the Control Panel from the TS480 on the Remote QTH, direkt i can an turn on ???
Please can anybody help me???
many thanks
73 de OE3CFC
chris
-
I don't recomend tu use the either the radio or the Remoterig box at temperatures below 0. I have my own remote station in a cupboard, isolated and with a heater which keeps the temp no lower than 10C. If you move a electronic equipment from -10C to 20C a lot of moist is created in the box, connectors etc. which can cause trouble. It's not much else to do than try do dry everything up.
73 de mike
-
;D many thanks mike
i have change my Remote station to my home and search and find the failure.
Its not the temperature (now i have on the remote qth 7-8 Degrees)the fail was the Baudrate in the RRC,she was not 57600 Baud.
Than i transfer the Station on Remote Qth an it,s work again very very fine.
Thank,s Mike
Best 73 to you and your Family
Merry Christmas an a happy New Year
from OE
de OE3CFC Chris :D