Remote Rig
RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: Mitch on 2015-04-20, 19:01:20
-
Can anyone help me out, been trying to configure Remoterig with my Kenwood 480HX for over a week no with no joy.
Followed all in the PDF file and watched films on Youtube but still not working for me. Is it possible for anyone to send
me picture's of the setting should be in Microbit Setup Manager.
Many Thanks
-
I have a networking checklist available that has helped over 300 OM's to get their RemoteRig system running.
If you want me to send it to, drop me a short mail at dj0qn (at) darc.de and I will send it to you.
73,
Mitch DJ0QN / K7DX
-
Hello Mitch,
Many thanks for your kind support to help me get RRC-1258 working. ;)
73
-
For me, a static IP aat the radio end and a 300 foot cat 6 solved all my problems. I could never figure out how to do port forwarding between to wireless routers with the radio shack router operating as a universal repeater. now with one router, a long cat 6 solved my problems. need to bury it now. working on the rr micro now trying to get it to turn on my ft 857 which I have set up to work with the front panel off and at remote site, or in car with a hot spot. cool..
bobf