Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: sv_clintrace999 on 2018-06-18, 07:09:16

Title: Need help for Icom IC-7100 Internet remote
Post by: sv_clintrace999 on 2018-06-18, 07:09:16

I'm having hard time to connect my ic7100 on the internet.

It already works using my Lan at home with this details

remote rrc (IP Address 192.168.254.227)

sip password: Dv9Hrv03
ip address: 192.168.254.228


radio rrc (IP Address 192.168.254.228)

its all working using the LAN Details above, now I went to my friends house and configured my Remote RRC as follows:

Radio RRC Dynamic DNS Settings

Check Interval: 10
DDNS Host Name: ddns.remoterig.com
Own Host Name: yt046cq3ddns.remoterig.com
Username:rrc1258-8241
Password: sfwnqlau



remote rrc (IP Address 192.168.1.227)


sip password: Dv9Hrv03
Sip contact(Radio RRC IP/hostname): yt046cq3ddns.remoterig.com


It's not working, I don't know if I miss something or did it wrong


Need all your help

Thanks,

Clint

Title: Re: Need help for Icom IC-7100 Internet remote
Post by: SM0GCU on 2018-06-18, 08:06:51

- You are missing a "dot" between 3 and d in your Own Host Name: yt046cq3ddns.remoterig.com

Go
ddns.remoterig.com/status/
and write
yt046cq3

Also set Dynamic DNS settings Check interval  at 10 in the rrc radio box.

/Curt

Title: Re: Need help for Icom IC-7100 Internet remote
Post by: dj0qn on 2018-06-18, 10:46:47

.....and make sure that your port forwards are correct in your router.

If you need my networking checklist that walks you through the process, drop me a short
mail at dj0qn (at) darc.de.

73,
Mitch DJ0QN / K7DX