Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: W9KB on 2010-12-02, 02:34:43
-
I would like some insight on the various 'light' indicators and green meter which appear in the client window.
I have in the upper left corner a green and red light, then in the lower left corner a lone red space orange green green black lights.
My receive audio has a few hick-ups now and then... and crashes if I try to use the computer for much else. I have decent internet connection.
A crib sheet would be handy.
Thanks & 73
Ken-W9KB
-
A -Green indicates that RRC is connected with RemoteRig, Red on connection failure.
B -Orange indicates that RTP audio stream between RRC and RemoteRig is open. Red on failure
C -Red indicates that Debug is turned ON. Should normally be OFF (Black)
D -Orange indicates that RRC's gateway for COM0-2 UDP/Serial interface is up and running. Red on failure
E -Green indicates that COM0 is activated
F -Green indicates that COM1 is activated
G -Green indicates that COM2 is activated
-
Roland, Thanks for the update.
73
Ken-W9KB