Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: Erik Finskas OH2LAK on 2015-11-11, 21:54:23
-
I upgraded by K3 and IC-7100 RRC's to the new version recently and the control end experiences now of random reboots. Nothing special gets to the debug terminal and the only thing through which I realise the reboot is the IP-address CWID. The connection does not go down with this so maybe reboot is not a good definition. Also real reboots with unit killing the connection, shutting down and booting up happen quite often.
Once I was able to catch the network address details getting printed to the terminal output at the same time with the IP-address CWID but can't yet say is it related.
I will downgrade to see does this behavior go away.
73
.-.-.
Erik OH2LAK
-
Interresting detail.
Downgraded to 2.86 and had the IC-7100 connection up for a while.
The IP-address CWID repeats exactly every 2 minutes. Next test is with the IP-address CWID switched off.
73
.-.-.
Erik OH2LAK
-
Have you activated ping watchdog by misstake, thats the only settings which can give reset exactly after the same time
/mike
-
That was my first thought also but looks like the watchdog function is not even possible for the control end.
I will make a factory reset for the unit
(https://dl.dropboxusercontent.com/u/6072690/RRC_watchdog.PNG)