Remote Rig
Webswitch 1216H Support in English => General discussion forum => Topic started by: dk3pz on 2023-09-10, 10:12:42
-
Hi, you have announced an update Version 4.92 May, 10th
but I can find only 4.91 May, 10 th
I have installed it and got a short warning; but it is working
Back to version 4.59 again
73, Hans, DK3PZ
-
May 10, 2023
A new firmware version(4.91 HAM) has been released
-
Hi, you have announced an update Version 4.92 May, 10th
but I can find only 4.91 May, 10 th
I have installed it and got a short warning; but it is working
Back to version 4.59 again
73, Hans, DK3PZ
I have installed it and got a short warning?
-
gm Jan, now it is announced as 4.91 ....strange ...
He the system info :
Company Microbit
Product 1216H WebSwitch
Model HAM
Software 4.59
Hardware 1
Bootloader 1.9
Build Dec 10 2019 13:16:00
S/N 1732
PID 4
Uptime 0 Days, 18 Hours, 48 Mins, 51 Secs
========================================
MAC 00:1e:fd:00:c4:9c
IP address 192.168.200.75
Netmask 255.255.255.0
Gateway 192.168.200.1
DNS 192.168.200.1
========================================
Max available memory 18301
DNS status OK, remoterig.com = 86.107.103.218
Dynamic DNS status Unknown
NTP status OK, next sync in 15823 secs (Tx 5041 Rx 5041)
Ping status (watchdog) OK [1 ms]
Active profile IC 7100
Last WD Reset 5
TCP Error counter 1
Webserver 1
-
I get this message :
Wrong file type, got WebSwitch 1216H HAM, expected -1
Click here to clear
-
now back to 4.59 again and it works fine as usual
-
I get this message :
Wrong file type, got WebSwitch 1216H HAM, expected -1
Click here to clear
"Click" here to clear ;)
-
it works ! but the status signal is a bit confusing.
-
;D