Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: partytyme on 2017-10-31, 00:14:14
-
my remote rig works ok but i have no s meter readings on signals coming in if i change modes they show up ok i am using a rc2000 head
-
Is your AGC turned off? Make sure it is on (FUNC-8 key).
Also see if you used the FUNC-5 key to change the meter to something else (manual page 19).
Your problem is not related to RemoterRig.
73,
Mitch DJ0QN / K7DX
-
bingo you got it first try thanks