Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: IZ0JOJ on 2018-10-30, 14:09:49
-
Hello everyone
thanks first of all for this device and for this FORUM that help users like me with some issues.
My remote control (the one with the panel of my TS 480) is working well but intermittently.
Today (as other times) I encounter this issue:
1) I press ON on the panel of TS 480
2) the interface get the LED (I mean the AUX/MIC) YELLOW colour
3) nothing happens.
This is the first screenshot (before I press ON)(https://image.ibb.co/djAfa0/Schermata-2018-10-30-alle-14-04-20.png)
and the second screenshot (after I press ON)(https://image.ibb.co/e9y58L/Schermata-2018-10-30-alle-14-04-28.png)
-
Update:
I crated a WIFI HOTSPOT with my Iphone 7. It works well.
So I believe the issue is on my DSL router?
Thanks
-
Hello.
Now it’s alwyas yellow led.
Also if I switch to another WiFi connection it stays yellow.
Can somebody help? Thanks
-
Solid yellow means that it is connected to the radio RRC. If you are still getting SIP errors, then
you need to look at one of the routers as the cause. The port forwards may be incorrect, there
may be a firewall issue, SIP ALG may not be turned off, etc.
73,
Mitch DJ0QN / K7DX
-
Many thanks for your answer.
Is it possible to know (in your opinion) if it's my side or the oterh side?
Could it also be the cable? Should I change the cables?
thanks
-
No, it is not possible to say which side. I suggest that you take the control RRC to someone
else's house and try it from there to see. If it is the same, then the problem is likely at the
radio side.
I doubt that it is the cable, since then it wouldn't work at all.
73,
Mitch DJ0QN / K7DX