Remote Rig

RRC 1258 Support in English => Configuration, RRC 1258 => Topic started by: W2SM on 2016-09-11, 03:01:29

Title: K3 mini RRC CW Keying
Post by: W2SM on 2016-09-11, 03:01:29

The keying is crazy.  The dots seem OK, but the dashes are basically the same length as the dots.  Makes it pretty hard to work anyone!!

I can't seem to find anything in the Keyer settings which would impact this.

Any suggestions would be appreciated.

Thanks,

Jim
W2SM

Title: Re: K3 mini RRC CW Keying
Post by: sm2o on 2016-09-11, 10:13:47

HI

I guess you have connected the keying cable to the keyer input, it should be connected to the straight key input of the remote radio

/mike

Title: Re: K3 mini RRC CW Keying
Post by: W2SM on 2016-09-11, 15:04:03

Yup -- I've been switching between my regular setup and the RRC setup as I work to get it going and the last time I moved things around I guess I plugged the keying cable into the paddle input instead of the key input.

Thanks es 73,

Jim