Remote Rig

RRC 1258 Support in English => Hardware, Cabling, Installations => Topic started by: WW3S on 2018-04-06, 01:29:50

Title: IC-7100 jumper settings
Post by: WW3S on 2018-04-06, 01:29:50
we have 2 late model IC-7100, we bought the additional 1258M boards.....so does that support the green and yellow wire as shown on page 108 of the manual? And should we follow page 108 for the 7100 or page 102 for the Icom CI-V as they contradict one another....
Title: Re: IC-7100 jumper settings
Post by: sm2o on 2018-04-06, 08:01:16
Hi

The 1258M board is all you need on control side, at radio side you need all the srtaps including the yellow and green, they are different colors just to make it easier to follow the wires

73 de mike
Title: Re: IC-7100 jumper settings
Post by: WW3S on 2018-04-10, 03:13:09
so what is number 1? The one with the notch? The picture in the manual shows #1 as the second pin in.....how is the picture in the manual oriented, from the front or rear of the control unit?
Title: Re: IC-7100 jumper settings
Post by: sm2o on 2018-04-10, 14:44:53
On page 108 you see both a picture and a drawing showing the strapping. The RRC front is down in both.
The figures showing the numbers of the pins in the MIC/AUX connector which they are connected to.

73 de mike
Title: Re: IC-7100 jumper settings
Post by: WW3S on 2018-04-11, 01:00:26
thank you, got the first pair working....