Remote Rig
RRC 1258 Support in English => Feature Requests => Topic started by: w5rhr on 2018-02-28, 15:36:28
-
Perhaps I am in minority, but would it be possible to provide the voltage needed to operate MH59 hand mic with future modifications?
Or I am wondering small adapter in line that provides the voltage on appropriate pins to power the mic?
Thank you
-
You are not minority...but seems that this topic does not interest to Microbit....
I've read a lot of posts with this problem without any solution.
I've just posted a similar request for Kenwood microphones....
73 EA5WA Juan Carlos
-
Some users have asked before us but with no answer in the forum. This is not good. I think it's an easy solution
-
Hi I have answered this many times before. MH-59 cannot be used, it is not a traditional DTMF mic, it has a Microcontroller inside which has separate data lines to the Radio. These datalines is not transferred by the Remoterig Use the statndard mic MH-31.
73 de mike
-
Yes @sm2o Mike, but you are not answering to the "power supply for mic" problem....
It's repeatly asked on this forum, but no answer from Microbit.
http://www.remoterig.com/forum/index.php?topic=6950.msg32006#msg32006
http://www.remoterig.com/forum/index.php?topic=5738.msg27010#msg27010
73's de EA5WA Juan Carlos