46
General discussion / Re: PC client
« on: 2012-03-03, 12:50:41 »
Hey
Any progress on the problem using TRX-Manager
73 Rune LA7THA
Any progress on the problem using TRX-Manager
73 Rune LA7THA
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
47
General discussion / Re: PC client
« on: 2011-08-29, 07:45:33 »
Hey
Thanks for info, than i will check regulary for any updates thanks agin for the nice product.
73 Rune LA7THA
Thanks for info, than i will check regulary for any updates thanks agin for the nice product.
73 Rune LA7THA
48
General discussion / PC client
« on: 2011-08-24, 12:38:56 »
Hey Ronald and the Groupe
Have you hade time to serch for the problems (pc client software) that was discovered just before you went for your summer vacation using TRX manager.
73 Rune LA7THA
Have you hade time to serch for the problems (pc client software) that was discovered just before you went for your summer vacation using TRX manager.
73 Rune LA7THA
49
General discussion / Re: Software for RRC-Micro PC-Client
« on: 2011-08-20, 18:16:30 »Joe. I have now tested against IC-7000 with some success.
Not a complete success. Its possible to send commands to the radio from TRX-Manager
Everything seems to work nicely. However the data from the radio to TRX-Manager seems
to get lost somewhere. So we have a problem there.
I'm going for my summer vacation in an hour, but this will be my on my priority list when I come back in August.
Until it seems that you are stuck to HamRadio DeLuxe.
Hey
Are you back from summer vacation and have you done anything more bug search in software
50
General discussion / Re: Software for RRC-Micro PC-Client
« on: 2011-07-01, 14:48:50 »
HI All
I have follow the post here and i have the same problem.
WIn 7/32
Micro software 1.3.1
Radio end software ver 2.40
Radio KW TS480
Software TRX Manager.
Micro bit "comport is 7" have the same problem cant connect to the radio.
When i start SIP all looks ok When i start TRX-Manager i got measage about com problem the same problem and error report as Joe have.
73 Rune LA7THA
I have follow the post here and i have the same problem.
WIn 7/32
Micro software 1.3.1
Radio end software ver 2.40
Radio KW TS480
Software TRX Manager.
Micro bit "comport is 7" have the same problem cant connect to the radio.
When i start SIP all looks ok When i start TRX-Manager i got measage about com problem the same problem and error report as Joe have.
73 Rune LA7THA
51
General discussion / Re: Software for RRC-Micro PC-Client
« on: 2011-06-16, 22:50:54 »
Hey
Just wonder, are we far away to have support for TRX-Manager ?
73 Rune LA7THA
Just wonder, are we far away to have support for TRX-Manager ?
73 Rune LA7THA
52
General discussion / Re: Odd Audio
« on: 2011-05-03, 12:51:14 »
Hey
I have a similar problem, audio is broken and i also loose connection between HRD and PC client, it say timout.
Using latest firmware in Radio RRC 2.38 PC client 1.2.0 radio is KW TS 480.
I send you the file from PC client on a mail.
73 Rune LA7THA
I have a similar problem, audio is broken and i also loose connection between HRD and PC client, it say timout.
Using latest firmware in Radio RRC 2.38 PC client 1.2.0 radio is KW TS 480.
I send you the file from PC client on a mail.
73 Rune LA7THA
53
General discussion / Re: PC client Software and CW
« on: 2011-05-03, 12:16:16 »
Hey
Mike fond my problem, i have forgoten to set I/O in radio RRC.
Thanks Mike for the help, working fine now. For users that may do the same see my scren shot.
73 Rune LA7THA
Mike fond my problem, i have forgoten to set I/O in radio RRC.
Thanks Mike for the help, working fine now. For users that may do the same see my scren shot.
73 Rune LA7THA
54
General discussion / Re: PC client Software and CW
« on: 2011-05-03, 07:21:43 »
Hey Mike
Bug key" should be off, (IS OFF) and the key line should be connected to the straight key input, (That is how it always have been connected) sidetone should be activated, ( IS set to 5 and i can listen to the side tone when i using my ordenary setup) and VOX should be activated (Is activated)
When you say straight Key input that is how it has been for yers and working fine using my "ordenary" RRC and TS480 display. As i am typing this measage i tested again using the settings abow and all is working fine in my "ordenary" setup.
I can NOT here the sidetone when i using the PC Micro Client setup when i try to send CW (Vox Not activated
) Using HRD version 5 build 2816 Beta. Is there a VOX "On/OFF" buton in your HRD Version ? anyway i cant find anything here that can turn VOX on or OFF but when i turn on "ordenary" sytem using RRC and TS480 Dispaly it says it is turned ON.
73 Rune LA7THA
Bug key" should be off, (IS OFF) and the key line should be connected to the straight key input, (That is how it always have been connected) sidetone should be activated, ( IS set to 5 and i can listen to the side tone when i using my ordenary setup) and VOX should be activated (Is activated)
When you say straight Key input that is how it has been for yers and working fine using my "ordenary" RRC and TS480 display. As i am typing this measage i tested again using the settings abow and all is working fine in my "ordenary" setup.
I can NOT here the sidetone when i using the PC Micro Client setup when i try to send CW (Vox Not activated
) Using HRD version 5 build 2816 Beta. Is there a VOX "On/OFF" buton in your HRD Version ? anyway i cant find anything here that can turn VOX on or OFF but when i turn on "ordenary" sytem using RRC and TS480 Dispaly it says it is turned ON.73 Rune LA7THA
55
General discussion / Re: PC client Software and CW
« on: 2011-05-02, 19:34:55 »
Hey Mike
I have done what you mentioned but still NIL cw here using the PC Micro client.
I Tested CW using my "ordenary" RRC and all worked fine. TS480 is set to bug Key, Vox, and even today i enabled TX audio sidetone all is working fine.
Just wonder, when i using PC Client if HRD disable Vox or something ? Not sure here what the problem is.
I have 3 screen shot added here of the TS480 Extended Menu using HRD you can see if there is anything that
is different than on your TS480 setup.
73 Rune LA7THA
I have done what you mentioned but still NIL cw here using the PC Micro client.
I Tested CW using my "ordenary" RRC and all worked fine. TS480 is set to bug Key, Vox, and even today i enabled TX audio sidetone all is working fine.
Just wonder, when i using PC Client if HRD disable Vox or something ? Not sure here what the problem is.
I have 3 screen shot added here of the TS480 Extended Menu using HRD you can see if there is anything that
is different than on your TS480 setup.
73 Rune LA7THA
56
General discussion / Re: PC client Software and CW
« on: 2011-05-02, 14:38:17 »
More info
Using PC client software 1.2.0
Firmware in radio RRC is 2.37
Rig used is Kenwood TS480
Software for radio Ctrl is HRD (Ham Radio Deluxe)
73 Rune LA7THA
Using PC client software 1.2.0
Firmware in radio RRC is 2.37
Rig used is Kenwood TS480
Software for radio Ctrl is HRD (Ham Radio Deluxe)
73 Rune LA7THA
57
General discussion / PC client Software and CW
« on: 2011-05-01, 23:29:32 »
Hey
I have tested the new version 1.2.0 PC client software this weekend.
All working fine exept for using the CW Keyboard.
Maybe there is someting i have forgoten, i cant PTT or go in to TX mode when i do CW.
I programed the F1 to, "DE LA7THA", and when i pres the F1 key all looks god but the radio dont do any TX, no power or cw out. What about enable VOX in HRD ? Hmmmm any sugestion
73 Rune LA7THA
I have tested the new version 1.2.0 PC client software this weekend.
All working fine exept for using the CW Keyboard.
Maybe there is someting i have forgoten, i cant PTT or go in to TX mode when i do CW.
I programed the F1 to, "DE LA7THA", and when i pres the F1 key all looks god but the radio dont do any TX, no power or cw out. What about enable VOX in HRD ? Hmmmm any sugestion
73 Rune LA7THA
58
General discussion / Re: Problem with Rig software
« on: 2011-05-01, 23:17:47 »
Hey
I have the same result here, HRD working fine but if it try TRX-Manager i want work.
If i use HRD or TRX-Manager in my RRC (version 1) control end using the frontend com port (serial to usb) all working fine.
73 Rune LA7THA
I have the same result here, HRD working fine but if it try TRX-Manager i want work.
If i use HRD or TRX-Manager in my RRC (version 1) control end using the frontend com port (serial to usb) all working fine.
73 Rune LA7THA
59
Allmänt diskussionsforum / Re: RCC Micro PC Client
« on: 2011-05-01, 23:06:43 »
Hey
The problem here was that I use old frmware on "radio end" RRC
73 Rune LA7THA
The problem here was that I use old frmware on "radio end" RRC
73 Rune LA7THA
60
Allmänt diskussionsforum / Re: RCC Micro PC Client
« on: 2011-04-12, 17:20:18 »
Hi Roland
Yes i under RRC settings com 1 i have : Mode 4 kenwood and i have selected com 8 under serial UDP Device. In hamradio i select com 8 but no luck.
I have som screen shot of my settings here i could send you, but i have done just what you told me
but no connection yet
73 Rune LA7THA
Yes i under RRC settings com 1 i have : Mode 4 kenwood and i have selected com 8 under serial UDP Device. In hamradio i select com 8 but no luck.
I have som screen shot of my settings here i could send you, but i have done just what you told me
but no connection yet
73 Rune LA7THA