Remote Rig
RRC 1258 Support in English => General discussion forum => Topic started by: ea3in on 2010-01-16, 17:39:48
-
Hello again.
In radio option 4 (General Kenwood) with no control panel, Is it possible to initiate a SIP connection without the connect button of the web interface?
Might be grounding a pin?
-
Any idea on this issue?
Thanks
-
Hi
Yes there is a undocumented way to activate SIP via a input. put the grey strap in place according to the attached drawing. Then you can use the UP-button to connect and disconnect the SIP-session
73 de mike
-
Thanks Mike, but I amb a MKI user.
Any chanc with the old RRC?
Thanks